Best Mainline Stabilizer for Home...
- Delhi
- 2026-06-18 12:10
Esysense T5 motion sensor tubelights at esysense.com: the 18W Radar Motion Sensor Tubelight and the 20W Motion Sensor Tubelight. Both use radar (microwave) detection and are Auto On/Off. The 18W is the right choice for standard Indian home hallways up to 4 meters. The 20W is better for longer hallways, office corridors, and any space with slightly higher ceilings. Both are T5 format — not T8. If you have existing T8 fittings, T5 tubes will not physically fit.
Both products below are verified from esysense.com/collections/motion-sensor-tubelight.
Format: T5
Wattage: 18W
Function: Auto On/Off
IP Rating: IP20
Link:esysense.com/products/motion-sensor-tube-light-auto-on-off-18w
Format: T5
Wattage: 20W
Function: Auto On/Off
IP Rating: IP20
Link:esysense.com/products/motion-sensor-tubelight-auto-on-off-20w
The number in T5 and T8 refers to tube diameter in eighths of an inch. This affects the physical holder and pin configuration — the two formats are not interchangeable.
Diameter: 16mm (slim, modern profile)
Common Use in India: Modern residential and new commercial installations
Holder Availability: Readily available from electrical suppliers
Physical Compatibility: Fits only T5 holders
Diameter: 26mm (standard Indian commercial fitting)
Common Use in India: Older commercial buildings, institutions, and factories
Holder Availability: Very widely available across India
Physical Compatibility: Fits only T8 holders
Bottom line:
If your existing fittings are T5: the Esysense T5 sensor tubelights are direct replacements. If your fittings are T8: check esysense.com, or use motion sensor panel lights as an alternative ceiling solution.
A: No — T5 and T8 tubes have different pin configurations and diameters. They are not interchangeable. Confirm your existing fitting is T5 before ordering.
A: No — the sensor is built into the tube. Once installed with the wall switch permanently ON, it operates fully automatically. No remote, no app, no programming. Motion detected: on. No motion for delay period: off.
A: For most standard Indian home hallways up to 4 meters at 2.7-3m ceiling height: 18W is sufficient. For longer hallways or higher ceilings: 20W. The price difference is minimal — when in doubt, choose the 20W.
A: Yes — radar (microwave) sensing is completely unaffected by ceiling fan airflow or fan motor heat. PIR sensors can false-trigger from fans; radar sensors do not.
A: A motion sensor tubelight is a linear LED tube with an integrated radar sensor. When someone enters the detection zone, the Doppler shift in the reflected radar signal triggers the tube to illuminate. When no motion is detected for the preset delay, the tube switches off. Esysense T5 sensor tubelights use radar detection for reliable Indian temperature performance.
A: Yes — T5 tubelights provide linear, even coverage along the full corridor length from a single ceiling fitting. With auto on/off sensing, the corridor illuminates only when someone is walking through — eliminating the habitual always-on corridor light problem common in Indian homes.
A: Esysense T5 motion sensor tubelights are available at esysense.com/collections/motion-sensor-tubelight. Always confirm current pricing before ordering.
The Esysense 18W T5 Radar Motion Sensor Tubelight is the right choice for most Indian home hallways and compact corridors. The 20W is the better choice for longer hallways, office corridors, and dining areas needing wider coverage. Both use radar sensing for Indian year-round reliability. Verify current pricing at esysense.com/collections/motion-sensor-tubelight before ordering.
Written from direct product testing and manufacturer specifications by Esysense Tech Innovations Pvt. Ltd., Ghaziabad, India. All prices, specs and model references are verified against live product listings at esysense.com. Last updated: June 2026