Spy Camera Dealer in Yamuna Nagar...
- Delhi
- 2026-06-21 10:14
TheEsysense wardrobe and cabinet sensor range covers every automatic cabinet lighting in 2026: ESY-M22 IR sensor (12-24V DC) for single-door wardrobes with LED strips; ESY-M23 dual IR sensor for double-door wardrobes; ESY-TC36 push-type switch (110-270V AC) for AC-wired cabinet bulbs without a DC drive. All verified at esysense.com/collections/wardrobes-cabinet-sensors-lighting
Buy Now: esysense.com/products/single-door-cabinet-ir-sensor
The ESY-M22 uses infrared proximity sensing to detect door position. When the cabinet door closes within 5-6 cm of the sensor body, reflection is strong — sensor switches the LED strip OFF. When the door opens beyond 5-6 cm, reflected signal drops — sensor switches the LED strip ON.
Automatic every time: no buttons, no manual operation. Light is on when the door is open, off when closed — always.
Compatible: wardrobes, kitchen cabinets, bathroom vanities, display cabinets — any single-door application with DC LED strip.
Wiring: Mains 220V → 12V/24V DC LED driver → ESY-M22 sensor input → LED strip output.
Soft-close compatible: contactless IR proximity (no physical contact) works with soft-close European hinges.
Buy Now: esysense.com/products/wardrobe-double-door-sensor
Uses dual infrared receivers — one monitoring each door independently. Light activates when either door opens. Light switches off only when both doors are fully closed. Essential for any wardrobe with two separate hinged panels — a single sensor cannot reliably monitor both doors simultaneously.
Buy Now: esysense.com/products/wardrobe-switch
A mechanical spring-loaded plunger that the closing door compresses (light OFF) and the opening door releases (light ON). Key advantage over DC sensors: works directly on 110-270V AC mains — no DC driver needed. Ideal for retrofitting existing AC-wired wardrobe or cabinet lights.
No DC driver required: connects directly to mains Live wire feeding the wardrobe bulb — the simplest wiring option.
110-270V AC: covers full Indian voltage range including inverter output.
Rated up to 2A: suitable for standard wardrobe LED bulbs and small LED fittings.
Choose ESY-TC36 when: you have an existing AC-wired cabinet light and want to automate it without adding a DC power supply.
Mains 220V AC → 12V or 24V DC LED driver.
Driver output → Cabinet sensor (ESY-M22, M23) input terminals.
Sensor output terminals → LED strip lights inside the wardrobe.
Exception: ESY-TC36 push switch connects directly in the AC Live wire — no DC driver needed.
Multiple strips: connect parallel to sensor output as long as combined wattage stays within sensor rating (M22: 40W at 12V / 60W at 24V).
A: ESY-M22 monitors one door. ESY-M23 uses dual IR receivers to monitor two doors independently — light on when either opens, off only when both are fully closed. Use ESY-M22 for single-door wardrobes; ESY-M23 for any two-panel wardrobe.
A: Yes — it is a 12-24V DC device requiring a DC LED driver between mains and sensor. The ESY-TC36 push-type switch is the only option wiring directly to AC mains without a driver.
A: A wardrobe sensor (like the Esysense ESY-M22) uses IR proximity to detect when a door opens — automatically switching the interior LED strip on — and off when the door closes. Contactless, no mechanical wear, compatible with soft-close hinges. Available at esysense.com/products/single-door-cabinet-ir-sensor
For single-door DC LED strip wardrobes: ESY-M22. For double-door wardrobes: ESY-M23. For AC-wired cabinet lights without a DC driver: ESY-TC36 push switch. Browse the full range at esysense.com/collections/wardrobes-cabinet-sensors-lighting
Written from direct product testing and manufacturer specifications by Esysense Tech Innovations Pvt. Ltd., Ghaziabad, India. All prices, specs and model references are verified against live product listings at esysense.com. Last updated: June 2026
Australia 
Canada 
India 
Singapore 
South Africa 
United Arab Emirates 
United Kingdom 
United States